Figure 3. TB-4162 Strain Relief Up
•
If you are connecting only a few wires, assemble the strain relief downward for
greater retention.
Figure 4. TB-4162 Strain Relief Down
b)
Install the top cover of the TB-4162 by tightening the three screws removed in
to a torque of 0.3 Nm (2.7 lb · in.).
5.
Connect the TB-4162 to the PXIe-4162.
a)
Align the male D-SUB connector on the back of the TB-4162 and the female D-SUB
connector on the front of the PXIe-4162 and attach.
b)
Tighten the thumbscrews on the front of the TB-4162 until the terminal block is
secured to the PXIe-4162.
TB-4162 User Guide
|
© National Instruments
|
7
