Chapter 6
SC-2054
6-4
©
National Instruments Corporation
Figure 6-2.
SC-2054 Connections
Table 6-1 describes the connectors on the SC-2054.
Table 6-1.
SC-2054 Connectors
Connectors
Connection
Description
J1, J2
50-pin male connectors
Attach J1 or J2 to the DAQ device via a type NB5
or R1005050 cable. The other connector can
daisy-chain the 48-channel digital I/O signals to
other 50-pin accessories such as a CB-50.
J3, J7
50-pin male connectors
J3 is tied to PPI A (ports 0 to 2)
or PPI C (ports 6 to 8),
depending on which half of the
type NB5 or R1005050 cable is
attached to J1. J7 is tied to
PPI B (ports 3 to 5) or PPI D
(ports 9 to 11), depending on
which half of the type NB5
cable is attached to J1.
Connect J3 or J7 to any DIO-24 accessories or
daisy-chain the 24-channel digital I/O signals to
other 50-pin accessories such as a CB-50 or a
16-channel or 24-channel SSR Series board.
Type NB5 Cable
or R1005050
DIO-96 or 6508
PPI A/C
SC-2054
PPI B/D
CB-50,
16-Channel or
24-Channel
SSR Series
SC-2054
CB-50
J1 or J2
J1 or J2
J3/J7
Port C
J4
Port B
J5
Port A
J6
Port C
J8
Port B
J9
Port A
J10
SC-206
X Series or
8-Channel SSR Series
SC-206
X Series or
8-Channel SSR Series
SC-206
X Series or
8-Channel SSR Series
SC-206
X Series or
8-Channel SSR Series
SC-206
X Series or
8-Channel SSR Series
SC-206
X Series or
8-Channel SSR Series
Summary of Contents for SC-2042-RTD
Page 1: ...SC 2042 RTD...
