Index
I-4
©
National Instruments Corporation
J3 connector pin assignments
(figure), 8-9
J4 connector pin assignments
(figure), 8-10
J5 connector pin assignments
(figure), 8-11
J6 connector pin assignments
(figure), 8-12
J7 connector pin assignments
(figure), 8-13
J8 connector pin assignments
(figure), 8-14
J9 connector pin assignments
(figure), 8-14
J10 connector pin assignments
(figure), 8-15
J11 connector pin assignments
(figure), 8-15
J12 connector pin assignments
(figure), 8-16
J13 connector pin assignments
(figure), 8-16
mounting, 8-16
overview, 8-1
parts locator diagram, 8-2
shield selection, 10-4
jumper W1 ground settings
(figure), 10-4
shield jumper location (figure), 10-4
SC-2057 adapter
cabling, 9-13 to 9-15
SCXI-1348 cable adapter
installation, 9-13 to 9-14
SCXI-1348 pin translations
(table), 9-15
connections, 9-2 to 9-3
connectors, 9-3 to 9-12
J1 connector pin assignments
(figure), 9-11
J1 through J6 connectors (table), 9-9
J2 connector pin assignments
(figure), 9-12
P1 and P2 connectors (table), 9-9
P1 and P2 pin assignments
(figure), 9-10
input connections, 9-7 to 9-8
32 channel SSR backplane
(figure), 9-7
SC-2060 and 8-channel SSR
backplane (figure), 9-8
SCXI-1163/R (figure), 9-7
mounting, 9-12
output connections, 9-4 to 9-6
32 channel SSR backplane
(figure), 9-5
ER-16 (figure), 9-5
SC-2061/2, ER-8, or 8-channel SSR
backplane (figure), 9-6
SCXI-1163/R (figure), 9-4
overview, 9-1
parts locator diagram, 9-2
shield selection, 10-5 to 10-6
jumper W1 ground settings
(figure), 10-6
shield jumper location (figure), 10-5
SCXI-1348 cable adapter
installation, with SC-2057 adapter,
9-13 to 9-14
pin translations (table), 9-15
shield selection, 10-3 to 10-6
ground settings for jumper W1
(figure), 10-3
SC-2056, 10-4
SC-2057, 10-5 to 10-6
shield jumper location (figure), 10-3
signal conditioning accessory
installation, 10-6
specifications
environment, A-1
physical, A-1
Summary of Contents for SC-2042-RTD
Page 1: ...SC 2042 RTD...