NI sbRIO-9601/9602/9602XT User Guide
2
ni.com
What You Need to Get Started
This section lists the software and hardware you need to start programming
the NI sbRIO device.
Software Requirements
You need a development computer with the following software installed
on it. Go to
ni.com/info
and enter the Info Code
rdsoftwareversion
for information about software version compatibility.
❑
LabVIEW
❑
LabVIEW Real-Time Module
❑
LabVIEW FPGA Module
❑
NI-RIO
Hardware Requirements
You need the following hardware to use the NI sbRIO device.
❑
NI sbRIO-9601/9602/9602XT
❑
19–30 VDC power supply
❑
Ethernet cable
Dimensions
This section contains dimensional drawings of the NI sbRIO devices. For
three-dimensional models, refer to the
Resources
tab of the NI sbRIO
product page at
ni.com
.
Note
The plated mounting holes are all connected to P1, the ground lug. Connect P1 or
one of the plated mounting holes securely to earth ground. Refer to the
section for cautions about current loops through the grounding lug.
