Equipment
Recommended
Model
Where Used
Requirements
(× 1)
■
Measurement error:
<±25 µV
■
Resolution: <1 µV
Precision DC
source
NI PXIe-5413
DC signal generation: ±5 V
Table 1. Required Instrumentation
Equipment
Where Used
Requirements
2 × BNC (m)-to-
SMA (m) adapter
Impedance: 50 Ω
BNC tee (f-f-f)
Impedance: 50 Ω
BNC (m)-to-BNC (m)
cable
Impedance: 50 Ω
2 × 4 mm
double banana (m)–
to-BNC (f) adapter
■
■
(× 1)
Impedance: 50 Ω
BNC feed-through
terminator
■
■
Impedance: 50 Ω
SMA (f)-to-probe tip
adapter
Note
These connectors are not
included in the probe kit. Contact PMK
Mess- und Kommunikationstechnik
GmbH to purchase these calibration
accessories.
Probe inputs
shorting adapter
Table 2. Required Cables and Connectors
© National Instruments
13
SA1000X Safety, Environmental, and Regulatory Information