National Instruments RMX-10051, User Manual

Page: 2 / 10

2
|
ni.com
|
RMX-10050/10051 User Guide
The AC output voltages provided by each PDU are based on the mains voltage and the specific
configuration. AC output ratings are also affected by the specific configuration.
Note
For the RMX-10051 (785344-01), the neutral pin in the inlet connector is not used.
Table 3.
RMX-10050/10051 Input and AC Output Ratings
Product
Mains Inlet
Connector
Mains Inlet
Rating AC Output Ratings
RMX-10050
(785341-01)
Single Phase
with DC Output IEC 60320 C20 100-240 V~
2P3W 16A
50/60 Hz C13: 100-240V~, 10 A max per receptacle
Total AC output:
8.7 A max with DC fully loaded,
16 A max with DC disabled
RMX-10050
(785342-01)
Single Phase IEC 60320 C20 100-240 V~
2P3W 16A
50/60 Hz C13: 100-240V~, 10 A max per receptacle
Total AC output: 16 A max
RMX-10051
(785344-01)
Three Phase
Wye 4P5W IEC 60309
ABL Sursum
S51S30 220/380-
240/415 V~ L-L
4P5W 16A
50/60 Hz C13: 220-240 V~, 10 A max per receptacle
C19: 220-240 V~, 16 A max per receptacle
Total AC output
Group J3: 16 A max
Group J2: 16 A max
Group J1: 12.7 A max with DC fully loaded,
16 A max with DC disabled
RMX-10051
(785343-01)
Three Phase
Delta 3P4W IEC 60309
ABL Sursum
S51S30 200-208 V~ L-L
3P4W 16A
50/60 Hz C13: 200-208 V~, 10 A max per receptacle
C19: 200-208 V~, 12.8 A max per receptacle
Total AC output with balanced load
Group J3: 9.2 A max
Group J2: 9.2 A max
Group J1: 5.6 A max with DC fully loaded,
9.2 A max with DC disabled