Indoor use only.
Note
Refer to the device datasheet on
for complete specifications.
Verifying the Kit Contents
Verify that the following items are included in the REM-11102 kit.
Figure 1. REM-11102 Kit Contents
1
2
3
4
1. NI REM-11102
2. Bus connector
3. Supply voltage connector
4. Spring-terminal block (x2)
Unpacking the Kit
Caution
To prevent electrostatic discharge (ESD) from damaging the device,
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1.
Touch the antistatic package to a metal part of the computer chassis.
2.
Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution
Never touch the exposed pins of connectors.
Note
Do not install a device if it appears damaged in any way.
3.
Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
REM-11102 Getting Started Guide
|
© National Instruments
|
3
