3. If the module is still not listed, power off the system, ensure that all hardware
is correctly installed, and restart the system.
4. Navigate to the Device Manager by right-clicking the Start button, and
selecting
Device Manager
.
5. Verify the PXIe-7911/7912/7915 appears in the Device Manager.
1. Under an NI entry, confirm that a PXIe-7911/7912/7915 entry appears.
Note
If you are using a PC with a device for PXI remote control
system, under
System Devices
, also confirm that no error
conditions appear for the
PCI-to-PCI Bridge
.
2. If error conditions appear, reinstall the FlexRIO Support driver.
What Should I Do if the PXIe-7911/7912/7915 Fails the Self-Test?
1. Restart the system.
2. Launch MAX, and perform the self-test again.
3. Power off the chassis.
4. Reinstall the failed module in a different slot.
5. Power on the chassis.
6. Perform the self-test again.
NI Services
to find support resources including documentation,
downloads, and troubleshooting and application development self-help such as
tutorials and examples.
Visit
to learn about NI service offerings such as calibration options,
repair, and replacement.
Visit
to register your NI product. Product registration facilitates
technical support and ensures that you receive important information updates from
NI.
© National Instruments
15
PXIe-7911/7912/7915 Getting Started
