![background image](http://html1.mh-extra.com/html/national-instruments/pxie-5774/pxie-5774_getting-started-manual_3622830011.webp)
Accessing FlexRIO Examples
FlexRIO examples are available in LabVIEW's NI Example Finder. Complete the following
steps to access the examples by task.
1.
In LabVIEW, click
Help
»
Find Examples
.
2.
In the
NI Example Finder
window that appears, click
Hardware Input and Output
»
FlexRIO
.
The examples are sorted by task. Click on an example and refer to the
Information
window for a description of the example. Refer the
Requirements
window for a list of
hardware devices that can run the example.
You can also click the Search tab to search all installed examples by keyword. For
example, search for
FlexRIO
to locate all FlexRIO examples.
Examples also are available online that demonstrate FlexRIO basics, such as using DRAM,
acquiring data from adapter modules, and performing high throughput streaming. Refer to
for these examples and for more information.
Block Diagram
The following figure shows a block diagram of the carrier portion of the PXIe-5774.
Figure 6. Carrier Block Diagram (KU040 and KU060)
DIO Connector
(Front Panel)
Adapter Module
Connector
+5 V
+1.8 V
+12 V
GPIO
Configuration, GPIO
MGTs
Reference Clock
Power Supplies
Flash
FPGA
PXIe Connectors
PXI Triggers
Clk 100
DStarB, DStarC
Gen3 x8 PCIe
+12 V, +3.3 V
+12 V
Clk 10
Module Clocking
Synchronization
MGTs
DRAM Bank 0
(2 GB)
DRAM Bank 1
(2 GB)
PXIe-5774 Getting Started Guide
|
© National Instruments
|
11