Figure 4. Installation of the PXIe-5668 Cables and 50
Ω
Loads
ACCESS
ACTIVE
4
3
1
5
6
2
3
1. SMA-to-SMA Cable, Labeled V
2. SMA-to-SMA Cable, Labeled U
3. 50
Ω
Load
4. SMA-to-SMA Cable, Labeled Y
5. SMA-to-SMA Cable, Labeled X
6. SMA-to-SMA Cable, Labeled W
1.
Using the three SMA-to-SMA coaxial cables labeled W, X, and Y, connect the LO1, LO2,
and LO3 connectors on the NI 5653 front panel to the associated LO1 IN, LO2 IN, and
LO3 IN connectors on the PXIe-5606 front panel.
2.
Using the SMA-to-SMA cable labeled U, connect the LO2 OUT connector on the
NI 5606 front panel to the CLK IN connector on the NI 5624R front panel.
3.
Using the SMA-to-SMA cable labeled V, connect the IF OUT connector on the
PXIe-5606 front panel to the IF IN connector on the NI 5624R front panel.
4.
Install a 50 Ω load on each of the PXIe-5606 module LO1 OUT, LO3 OUT, and
IF IN / BIAS OUT connectors.
PXIe-5668 Getting Started Guide
|
© National Instruments
|
9
