National Instruments PXIe-5667, Getting Started Manual

Page: 8 / 33

12. Power on the chassis.
Related Information
Installing the Software on page 4
Interconnecting the NI 5667 Modules
Caution
The signal pins of this product's input/output ports can be damaged if
subjected to ESD. To prevent damage, remove power from the product before
connecting cables and employ industry-standard ESD prevention measures during
installation, maintenance, and operation.
Figure 3. Installation of Included NI 5667 Cables and Termination Loads
ACCESS ACTIVE
CLK IN
CLK OUT
PFI 1
ESD
SENSITIVE
TT L
6.3 Vp-p
MAX
2 Vp-p
NOM
+20 dBm MAX
50
Ω
50
Ω
50
Ω
NI PXIe- 562 2
16-Bit IF Digitizer
IF IN
ESD
SENSITIVE
ACCESS ACTIVE
OUT IN
LO3
LO2
LO1
ALL PORTS
50
Ω
NI PXIe-5603
Downconverter 20 Hz - 3.6 GHz
RF IN
0 V DC, DC COUPLED
25 V DC MAX, AC COUPLED
+20 dBm MAX > 10 MHz
0 dBm MAX < 10 MHz
IF OUT
+22 dBm MAX
0 V DC
+15 dBm MAX
25 V DC MAX
+15 dBm MAX
0 V DC
ACCESS ACTIVE
NI PXIe-5653
Synthesizer
REF IN
10 MHz
5 V p-p MAX
REF OUT
10 MHz
1.5 V p-p MAX
ESD
SENSITIVE
LO3
800 MHz
LO2
4 GHz
LO1
3.2 GHz - 8.3 GHz
OUT
ALL PORTS
50
Ω
REF OUT
100 MHz
1.5 V p-p MAX
ACCESS ACTIVE
IF Conditioning Module
NI PXIe- 569 4
ESD
SENSITIVE
REF/LO
IN
10 MHz/
215 MHz
+10 dBm NOM, +18 dBm MAX
12VDC MAX
IF
OUT
187.5 MHz/
193.6 MHz/
21.4 MHz
+22 dBm MAX
0 VDC MAX
IF
IN
187.5 MHz/
193.6 MHz
+18 dBm MAX
12 VDC MAX
REF
OUT
10 MHz
+10 dBm NOM
12 VDC MAX
LO
OUT
215 MHz
+10 dBm NOM
12 VDC MAX
NI PXIe-5693
Preselector
ACCESS ACTIVE
25 VDC MAX
RF
OUT
DC - 7 GHz
25 VDC MAX
RF
IN
DC - 7 GHz
+10 dBm MAX
25 VDC MAX
EXT
FILTER
IN
EXT
FILTER
OUT
ESD
SENSITIVE
N
N
N
N
P
P
J
J
J
J
J
J
1
3
2
6
7
5
4
1. Short, Semi-Rigid SMA-to-SMA Cable, Labeled N
2. Flexible RF SMA-to-SMA Cable
3. Flexible RF SMA-to-SMA Cable
4.
50 Ω
Termination Load
5. Plastic Cap
6. Long, Semi-Rigid SMA-to-SMA Cable, Labeled P
7. Medium, Semi-Rigid SMA-to-SMA Cable, Labeled
J
1. Using the short semi-rigid SMA-to-SMA coaxial cable (labeled N), connect the IF IN
connector on the NI 5622 front panel to the IF OUT connector on the NI 5694 front
panel.
2. Using the short semi-rigid SMA-to-SMA coaxial cable (labeled N), connect the IF IN
connector on the NI 5694 front panel to the IF OUT connector on the NI 5603 front
panel.
NI PXIe-5667 (3.6 GHz) Getting Started Guide | © National Instruments | 7