Table 6.
NI 5622 IF Digitizer Front Panel LEDs
LED
Indication
ACCESS Indicates the basic hardware status of the module.
OFF—The module is not yet functional, or the module has detected a problem
with a power rail.
AMBER—The module is being accessed.
Accessed
means that the device setup
registers are being written to in order to control the device.
GREEN—The module is ready to be programmed by NI-RFSA.
RED—The module has exceeded approved operating temperature and thermal
shutdown has occurred.
ACTIVE Indicates the module state.
OFF—The module is not armed, triggered, or acquiring a waveform.
AMBER—The module is armed and waiting for a trigger.
GREEN—The module has received a Reference Trigger. A green LED also
indicates that the module is acquiring a waveform.
RED—The module has detected an error. NI-RFSA must access the module to
determine the cause of the error. The LED remains red until the error condition is
removed.
NI PXIe-5667 (3.6 GHz) Getting Started Guide
|
© National Instruments
|
15
Summary of Contents for PXIe-5667
Page 1: ...PXIe 1075...
