background image

Refer to the 

NI Trademarks and Logo Guidelines

 at 

ni.com/trademarks

 for information on National Instruments

trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective
companies. For patents covering National Instruments products/technology, refer to the appropriate location: 

Help

»

Patents

 in your software, the 

patents.txt

 file on your media, or the 

National Instruments Patent Notice

 at 

ni.com/

patents

. You can find information about end-user license agreements (EULAs) and third-party legal notices in the

readme file for your NI product. Refer to the 

Export Compliance Information

 at 

ni.com/legal/export-compliance

 for

the National Instruments global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other
import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE
INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government
Customers: The data contained in this manual was developed at private expense and is subject to the applicable limited
rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.

© 2012—2014 National Instruments. All rights reserved.

375885B-01

Sep14

Summary of Contents for PXIe-5632





















Reviews: