Appendix B
Troubleshooting and Common Questions
©
National Instruments Corporation
B-5
PXI-GPIB/PMC-GPIB for Windows NT
How can I determine which version of the GPIB software I have
installed?
Run the Diagnostic utility: select the Diagnostic item under
Start»Programs»GPIB Software. The Diagnostic utility displays the
version of the GPIB software that is installed in a banner at the bottom
of the window that appears.
How many GPIB interfaces can I configure for use with my GPIB
software for Windows NT?
You can configure the GPIB software for Windows NT to communicate
with up to four GPIB interfaces.
How many devices can I configure for use with my GPIB software for
Windows NT?
The GPIB software for Windows NT provides a total of 100 logical devices
for applications to use. The default number of devices is 32.
Are interrupts required with the GPIB software for Windows NT?
Yes, interrupts are required.
How can I determine if my GPIB hardware and software are
installed properly?
Run the Diagnostic utility: select the Diagnostic item under
Start»Programs»GPIB Software. Refer to the
section earlier in this appendix or the online
help to troubleshoot any problems.
When should I use the Win32 Interactive Control utility?
You can use the Win32 Interactive Control utility to test and verify
instrument communication, troubleshoot problems, and develop your
application. For more information, refer to the
How do I use an NI-488.2M language interface?
For information about using NI-488.2M language interfaces, refer to
Chapter 3, Developing Your Application, in the GPIB User Manual for
Windows 95 and Windows NT.
