Chapter 2
Installation and Configuration
PXI-GPIB/PMC-GPIB for Windows NT
2-2
©
National Instruments Corporation
5.
Insert the PXI-GPIB into the selected 5 V slot. Use the injector/ejector
handle to fully inject the device into place. Figure 2-1 shows how to
install the PXI-GPIB into a PXI or CompactPCI chassis.
Figure 2-1.
Installing the PXI-GPIB
6.
Screw the front panel of the PXI-GPIB to the front panel mounting rail
of the PXI or CompactPCI chassis.
7.
Turn on your PXI or CompactPCI chassis and start Windows NT.
The PXI-GPIB installation is now complete. Proceed to the
section, later in this chapter.
1
Injector/Ejector Handle (In Down Position)
2
PXI-GPIB Board
3
PXI Chassis
4
Injector/Ejector Rail
8
7
6
5
4
3
2
1
ON
STANDBY
4
1
2
3
