©
National Instruments Corporation
A-1
PXI-GPIB/PMC-GPIB for Windows NT
Appendix
A
Uninstalling the
Hardware and Software
This appendix describes how to uninstall your PXI-GPIB or PMC-GPIB
and the GPIB software from Windows NT.
Uninstalling the Hardware
Before you physically remove the GPIB hardware from your system, you
must remove the hardware information using the GPIB Configuration
utility. Complete the following steps to remove the hardware information:
1.
Select Start»Settings»Control Panel and double-click on the GPIB
icon.
2.
In the GPIB Configuration dialog box, select the GPIB interface you
want to remove from the GPIB Board list.
3.
Click on the Board Type button and select None from the list that
appears, as shown in Figure A-1. Click on the OK button to save the
new Board Type setting.
Figure A-1.
Board Type Dialog Box
4.
Click on the OK button to save your changes and exit the GPIB
Configuration utility.
5.
Shut down Windows NT, turn off your system, and physically remove
the interface from your system.
