manualshive.com logo in svg

National Instruments PXI-8840 Quad-Core, Getting Started Manual, Page: 8 / 22

Share
Download
National Instruments PXI-8840 Quad-Core Getting Started Manual Download Page 8

target automatically. You may also reboot the controller by right-clicking the
target name under 

Remote Systems

 and selecting 

Reboot

.

After rebooting the PXI controller, it appears in the

 Remote Systems

 category with the

assigned name.

6.

Expand the PXI controller view in the 

Remote Systems

 branch and select 

Software

.

7.

Click the 

Add/Remove Software

 button in the toolbar to launch the LabVIEW Real-

Time Software Wizard.

8.

Install the LabVIEW Real-Time software and device drivers that you require on the RT
target. Refer to the NI Web site at 

ni.com/info

 and enter the Info Code 

etspc

 for the

latest information about supported software.

After software installation, the controller automatically reboots, and you now can program it
using LabVIEW Real-Time.

Note

 

Refer to the 

RT Getting Started Guide

 on your host computer for more

information about setting up your RT target.

LabVIEW RT Configuration Switches

Use the LabVIEW RT configuration switches to configure LabVIEW RT if it is installed on
the controller. If you are not using LabVIEW RT, these switches should remain in the OFF
position. The controller reads these switches only after a system reset.

The NI PXI-8840 Quad-Core controller includes the following LabVIEW RT configuration
switches:
•

Switch 1—

Boot LabVIEW RT

: Set this switch to ON to boot LabVIEW RT.

•

Switch 2—

Boot Safe Mode

: Set this switch to ON to boot LabVIEW RT into safe mode

to reconfigure TCP/IP settings and to download or update software from a host computer.
This switch overrides the behavior of Switch 1. Booting the controller into safe mode
does not start the embedded LabVIEW RT engine. After changing the settings or
software, reboot the controller with this switch OFF to resume normal operation.

•

Switch 3—

Disable Startup VI

: Set this switch to ON to prevent VIs from automatically

running at startup if the controller becomes inaccessible because of a startup VI.

•

Switch 4—

Reset IP Address

: Set this switch to ON to reset the IP address and other

TCP/IP settings to their factory defaults. Use this switch if moving the controller to a
different subnet or if the current TCP/IP settings are valid.

Note

 

By default, the target automatically attempts to connect to the network using

DHCP. If the target cannot initiate a DHCP connection, the target connects to the
network with a link-local IP address or 

169.254.x.x.

The following figure shows the location of the LabVIEW RT configuration switches. The
switches are shown in the OFF position.

NI PXI-8840 Quad-Core Getting Started Guide

  | 

© National Instruments

  | 

7

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PXI-8840 Quad-Core























Reviews:

No comments