manualshive.com logo in svg

National Instruments PXI-8840 Quad-Core, Getting Started Manual, Page: 19 / 22

Share
Download
National Instruments PXI-8840 Quad-Core Getting Started Manual Download Page 19

Figure 7.

 Clearing the CMOS Contents

1

1. Push-Button Switch SW1

Worldwide Support and Services

The NI website is your complete resource for technical support. At 

ni.com/support

, you have

access to everything from troubleshooting and application development self-help resources to
email and phone assistance from NI Application Engineers.

Visit 

ni.com/services

 for NI Factory Installation Services, repairs, extended warranty, and

other services.

Visit 

ni.com/register

 to register your NI product. Product registration facilitates technical

support and ensures that you receive important information updates from NI.

A Declaration of Conformity (DoC) is our claim of compliance with the Council of the
European Communities using the manufacturer’s declaration of conformity. This system
affords the user protection for electromagnetic compatibility (EMC) and product safety. You
can obtain the DoC for your product by visiting 

ni.com/certification

. If your product supports

calibration, you can obtain the calibration certificate for your product at 

ni.com/calibration

.

18

  | 

ni.com

  | 

NI PXI-8840 Quad-Core Getting Started Guide

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PXI-8840 Quad-Core























Reviews:

No comments