manualshive.com logo in svg

National Instruments PXI-8840 Quad-Core, Getting Started Manual, Page: 15 / 22

Share
Download
National Instruments PXI-8840 Quad-Core Getting Started Manual Download Page 15

USB CD/DVD-
ROM

You can install from a USB CD/DVD-ROM using a bootable installation
CD.

SCSI CD-ROM

Other types of CD-ROM drives are available. Check with the vendor to
make sure Windows 7 supports the drive.

Mapped
network drive

You can use the Ethernet to connect to another computer. If you share the
USB CD/DVD-ROM drive on the other computer, you can map the
shared USB CD/DVD-ROM drive to a drive letter on the NI PXI-8840
Quad-Core.

A USB CD/DVD-ROM drive is available from National Instruments, part number 778492-01.

Upgrade Information

How do I upgrade system memory?

You can change the amount of installed RAM on the NI PXI-8840 Quad-Core by upgrading
the DDR3L SO-DIMM. Complete the following steps to upgrade the RAM.
1.

Remove the NI PXI-8840 Quad-Core from the PXI chassis.

2.

Locate the DDR3L SO-DIMM module on the side of the controller, as shown in the
following figure.

3.

Install the new DDR3L SO-DIMM module into the slot.

NI PXI-8840 Quad-Core System Memory Information

National Instruments offers the following types of SO-DIMMs for use with the NI PXI-8840
Quad-Core controller.
•

1600 MHz DDR3L PC3-12800 4 GB, 512 MB × 64, 1.18 in. max (NI part number
782341-4096)

•

1600 MHz DDR3L PC3-12800 8 GB, 1024 MB × 64, 1.18 in. max (NI part number
783001-8192)

Note

 

National Instruments has tested and verified that the DDR3L SO-DIMMs we

sell work with the NI PXI-8840 Quad-Core controller. We recommend you purchase
your DDR3L SO-DIMM modules from National Instruments. Other off-the-shelf
DDR3L SO-DIMM modules are not guaranteed to work properly.

14

  | 

ni.com

  | 

NI PXI-8840 Quad-Core Getting Started Guide

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PXI-8840 Quad-Core























Reviews:

No comments