![background image](http://html.mh-extra.com/html/national-instruments/ppc-2115/ppc-2115_user-manual_710223013.webp)
Chapter 2
System Setup
PPC-2115 User Manual
2-4
ni.com
Dual Display Setting
To use an auxiliary CRT monitor with the PPC-2115, connect the monitor
to the CRT port on the PPC-2115. Follow these steps to configure the CRT
monitor settings:
1.
After powering on the system, click the Intel icon in the toolbar on the
PPC-2115 LCD monitor.
2.
Select
Graphics Options»Output Device
.
3.
The display options window appears, showing the currently active
display device. Use this window to select and configure alternate
display devices.
Panel Mounting
Follow these steps to mount the PPC-2115 in a panel:
1.
Be sure the adhesive waterproof gasket on the front bezel is in position.
2.
Install the PPC-2115 into the panel opening. (Refer to Appendix A,
Specifications
, for cutout dimensions.)
3.
Attach the clamps included in the accessory pack to the holes in the
bezel.
4.
Insert the screws included in the accessory pack into the clamps.
Tighten the screws to fasten the PPC-2115 against the panel.
Note
The mounting panel thickness should be less than 6 mm (0.236 in.).