©
National Instruments Corporation
3-1
PCMCIA-GPIB for MacOS
Chapter
3
Installation Verification
This chapter contains instructions for verifying the installation and
configuring your NI-488.2 software.
Verify the Hardware Installation
To verify and test the hardware installation, run the
IBDIAG PCMCIA
hardware diagnostic program that came with your NI-488.2 software.
IBDIAG PCMCIA
verifies that your hardware is functioning properly and
that the configuration of your card does not conflict with anything else
in the system.
Complete the following steps to verify the hardware installation.
1.
Disconnect all PCMCIA-GPIB cables from your computer before
running the hardware verification program.
2.
Power on your computer.
3.
Insert the PCMCIA-GPIB card that you want to test.
4.
Open the
NI-488.2
folder and double-click on
IBDIAG PCMCIA
.
A test window appears on the screen, as shown in Figure 3-1.
Figure 3-1.
Test Window
