Chapter 2
Hardware and Software Installation
©
National Instruments Corporation
2-3
PCMCIA-GPIB for MacOS
Step 1. Install the NI-488.2 Files and Folders
Caution:
Virus detection software might prevent the installer from copying
important files to the
System Folder
. You must disable or bypass any
virus prevention software before attempting the installation procedure.
To install the NI-488.2 files and folders, complete the following steps:
1.
Insert the NI-488.2 software distribution disk and double-click on
the
NI-488.2 Installer
icon.
2.
Click on the icon on the left side of the Installer window, shown in
Figure 2-2, and drag it to any available disk on the right side of the
window.
Figure 2-2.
Installer Window
!
