National Instruments nuDrive 2CF-001, User Manual

Page: 5 / 32

© National Instruments Corporation 5 nuDrive Accessory User Guide
What You Need to Get Started
To set up and use your nuDrive accessory, you will need the following
items:
❑
The nuDrive accessory and nuDrive Accessory User Guide
❑
Power cord (IEC type)
❑
One or more of the following National Instruments cables and
adapters:
– SH68-68-S shielded cable, part number 185262-02
– NB1 ribbon cable, part number 180524-20
– SH50-50 shielded cable, part number 185319-02
– SH100-100-F shielded cable, part number 185095-02
– SH68-C68-S shielded cable, part number 186381-02
– 68M-50F step/servo bulkhead cable adapter, part number
185630-01
❑
(Optional) ISO power supply (for FlexMotion-6C boards)
Detailed specifications for the nuDrive accessory are in the Specifications
section later in this guide.
Safety Information
Warnings Keep away from live circuits. Do not remove equipment covers or shields unless
you are trained to do so. Hazardous voltages may exist even when the equipment is turned
off. To avoid a shock hazard, do not perform procedures involving cover or shield removal
unless you are qualified to do so and disconnect all field power prior to removing covers or
shields.
Do not operate damaged equipment. The safety protection features built into this device
can become impaired if the device becomes damaged in any way. If the device is damaged,
turn the device off and do not use until service-trained personnel can check its safety. If
necessary, return the device to National Instruments for service and repair to ensure that its
safety is not compromised.
Do not operate this equipment in a manner that contradicts the information specified in this
document. Misuse of this equipment could result in a shock hazard.
Do not substitute parts or modify equipment. Because of the danger of introducing
additional hazards, do not install unauthorized parts or modify the device. Return the