©
National Instruments Corp.
11
NI 9795 Getting Started Guide
For more information about configuring the NI WSN system, refer
to
Start»All Programs»National Instruments»NI-WSN»
Configuring WSN in MAX
.
Step 5. Attach Sensors and Signal Lines
Attach sensors and signal lines to the terminal block or accessory
terminals for each node. For device pinouts, refer to the device
documentation.
Step 6. Start Using the NI WSN System
To start using the NI WSN system, complete the following steps:
1. Open a new LabVIEW project.
If the NI CompactRIO controller is on the local subnet,
complete the following steps:
a. Right-click the project name and select
New»Targets and
Devices
. In the Add Targets and Devices on My Project
dialog box, select
Existing target or device
and expand
the
Real-Time CompactRIO
folder. When you expand
the
Real-Time CompactRIO
folder, the network is
scanned for any connected NI CompactRIO devices. Wait
for device detection.
