Note
When using the Remote I/O Shield Set, install the shield rail supports before
mounting the module.
1.
Align the REM-11100 over the appropriate bus connector.
Note
Verify that the bus connector socket aligns with the socket on the
underside of the module.
2.
Press the REM-11100 directly onto the bus connector and DIN rail until it clicks into
place.
Caution
Tilting the module when mounting it on the DIN rail will damage the
contacts.
Installing Spring-Terminal Blocks
What to Use
•
REM-11100
•
Spring-terminal block
What to Do
Align the spring-terminal block over the REM-11100 and press until it clicks into place.
6
|
ni.com
|
REM-11100 Getting Started Guide
