National Instruments NI PXIe-7976R, Getting Started Manual

Page: 4 / 16

Table 1. NI FlexRIO Documentation Locations and Descriptions (Continued)
Document Location Description
NI FlexRIO Help Available from the Start menu
and at
ni.com/manuals .
Contains information about the
FPGA module, adapter module,
and CLIP configuration
information.
LabVIEW Examples Available in NI Example
Finder. In LabVIEW, click
Help » Find Examples »
Hardware Input and
Output
» FlexRIO .
Contains examples of how to run
FPGA VIs and Host VIs on your
device.
IPNet ni.com/ipnet Contains LabVIEW FPGA
functions and intellectual property
to share.
NI FlexRIO product
page ni.com/flexrio Contains product information and
data sheets for NI FlexRIO
devices.
Required Components
The following items are necessary to set up and use your NI FlexRIO system:
•
The NI FlexRIO hardware device, comprised of the following items:
–
NI 7976R
– NI FlexRIO adapter module
Note
You can use the NI FlexRIO FPGA module without an adapter module for
coprocessing or peer-to-peer streaming. The adapter module installation instructions
in this document do not apply to these circumstances.
The following figure shows the combined module.
NI PXIe-7976R FPGA Module Getting Started Guide | © National Instruments | 3