3-2
|
ni.com
Chapter 3
SC Express Considerations
PXI_STAR Trigger
In a PXI Express system, the Star Trigger bus implements a dedicated trigger line between the
system timing slot and the other peripheral slots. The Star Trigger can be used to synchronize
multiple devices or to share a common trigger signal among devices.
A Star Trigger controller can be installed in this system timing slot to provide trigger signals to
other peripheral modules. Systems that do not require this functionality can install any standard
peripheral module in this system timing slot.
An SC Express module receives the Star Trigger signal (PXI_STAR) from a Star Trigger
controller. PXI_STAR can be used as an external source for many AI, AO, and counter signals.
An SC Express module is not a Star Trigger controller. An SC Express module can be used in
the system timing slot of a PXI system, but the system will not be able to use the Star Trigger
feature.
PXI_STAR Filters
You can enable a programmable debouncing filter on each PFI, PXI_Trig, PXIe_DSTAR, or
PXI_STAR signal.
PXIe_DSTAR<A..C>
PXI Express devices can provide high-quality and high-frequency point-to-point connections
between each slot and a system timing slot. These connections come in the form of three
low-voltage differential star triggers that create point-to-point, high-frequency connections
between a PXI Express system timing module and a peripheral device. Using multiple
connections enable you to create more applications because of the increased routing capabilities.
Table 3-1 describes the three differential star (DSTAR) lines and how they are used.
The DSTAR lines are only available for PXI Express devices when used with a PXI Express
system timing module. For more information, refer to the
PXI Express Specification
at
www.pxisa.org
.
Table 3-1.
PXIe_DSTAR Line Descriptions
Trigger Line
Purpose
PXIe_DSTARA
Distributes high-speed, high-quality clock signals from the system
timing slot to the peripherals (input).
PXIe_DSTARB
Distributes high-speed, high-quality trigger signals from the system
timing slot to the peripherals (input).
PXIe_DSTARC
Sends high-speed, high-quality trigger or clock signals from the
peripherals to the system timing slot (output).
