background image

The MAX self-test performs a basic verification of hardware resources.

6.

Run the test panels on the device to verify the signal.
a)

To access the test panels, right-click the device and select 

Test Panels

. The

NI-SCOPE Soft Front Panel (SFP) launches automatically.

b)

Do one of the following to connect a signal to the device:

Connect an external signal by clicking 

Auto

 or by selecting the appropriate

device parameters for the signal, or

Connect a cable from PFI 1 to an input channel and select 

Utility

»

Probe

Compensation

 from the SFP menu. Click 

Auto

 to display a 1 kHz square

wave.

Note

 

The PXI/PCI-5124 has self-calibration capabilities, which you can

access programmatically with NI-SCOPE and your ADE, or interactively with
NI-SCOPE SFP or MAX.

Related Information

Making a Measurement

 on page 12

What Should I Do if the Module Fails the Self-Test?

 on page 14

What Should I Do if the PXI/PCI-5124 Doesn't Appear in MAX?

 on page 14

Programming the PXI/PCI-5124

You can acquire data interactively using the NI-SCOPE SFP, or you can use the NI-SCOPE
instrument driver to program your device in the supported ADE of your choice.

10

  | 

ni.com

  | 

NI PXI/PCI-5124 Getting Started Guide

Summary of Contents for NI PXI-5124





















Reviews: