MID-7654/7652 Servo Power Motor Drive User Guide
28
ni.com
Analog output ........................................................5-position mini-combicon 3.81 mm plug (1 total)
AC power ...............................................................Detachable AC power cord (IEC standard type)
Motion I/O .............................................................68-pin female high density VHDCI type
Power Supply
Input voltage ..........................................................90–132 VAC / 198–264 VAC, 47–63 Hz
Input fuse
115 VAC (factory default)..............................8 A (Littelfuse #312008)
230 VAC.........................................................6 A (Littelfuse #312006)
Input fuse dimensions ............................................0.25 in. × 1.25 in.
Input Power Peak Current (at max load)
115 VAC.........................................................10 A
230 VAC.........................................................5 A
Installation category...............................................II
Environment
Operating temperature ...........................................0 to 50 °C (32 to 122 °F)
Storage temperature ...............................................–20 to 70 °C (–4 to 158 °F)
Humidity ................................................................10% to 90% RH, noncondensing
Maximum altitude..................................................2,000 m
Pollution Degree ....................................................2
Host Bus Voltage Interlock
Undervoltage threshold ..........................................4 VDC
Physical
Dimensions (W × H × L) .......................................25.4 cm × 8.8 cm × 30.6 cm
(10 in. × 3.5 in. × 12.0 in.)
Weight ....................................................................10.2 kg (22.5 lb.)
Safety
This product is designed to meet the requirements of the following standards of safety for electrical
equipment for measurement, control, and laboratory use:
•
EN 61010-1:1993/A2:1995, IEC 61010-1:1990/A2:1995
•
UL 3101-1:1993, UL 3111-1:1994, UL 3121-1:1998
•
CAN/CSA C22.2 No. 1010.1:1992/A2:1997
UL Recognized to UL 508C, power conversion equipment, File # E208822
Note
For UL and other safety certifications, refer to the product label or the
section.