National Instruments NI cRIO-9111, User Manual And Specifications

Page: 16 / 20

Physical Characteristics
If you need to clean the chassis, wipe it with a dry towel.
Weight
cRIO-9011 and cRIO-9113 Approx. 581 g (20 oz)
cRIO-9112, cRIO-9114, cRIO-9116,
and cRIO-9118 Approx. 880 g (31 oz)
Environmental
Operating temperature
(IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C
Caution If the ambient temperature is 56 °C to 70 °C, you must mount the chassis
on a thermally conductive material. For information about how mounting
configuration can affect the accuracy of C Series modules, visit
ni.com/info and
enter the Info Code
rdcriotemp
. Measure the ambient temperature at each side of
the CompactRIO system, 63.5 mm (2.5 in.) from the side, and 25.4 mm (1 in.) from
the rear cover of the system.
Storage temperature
(IEC 60068-2-1, IEC 60068-2-2) -40 °C to 85 °C
Ingress protection IP40
Operating humidity (IEC 60068-2-78) 10% RH to 90% RH, noncondensing
Storage humidity (IEC 60068-2-78) 5% RH to 95% RH, noncondensing
Pollution Degree 2
Maximum altitude 5,000 m
Indoor use only.
Shock and Vibration
To meet these specifications, you must panel mount the CompactRIO system and affix ferrules
to the ends of the terminal lines.
Operating vibration
Random (IEC 60068-2-64) 5 g
rms
, 10 Hz to 500 Hz
Sinusoidal (IEC 60068-2-6) 5 g, 10 Hz to 500 Hz
Operating shock (IEC 60068-2-27) 30 g, 11 ms half sine; 50 g, 3 ms half sine;
18 shocks at 6 orientations
16 | ni.com | NI cRIO-9111/9112/9113/9114/9116/9118