©
National Instruments Corporation
3
NI CB-37F-HVD Installation Guide
❑
Documentation (available at
ni.com/manuals
)
–
Read Me First: Safety and Radio-Frequency Interference
–
DAQ Getting Started Guide
–
Documentation for your DAQ device
–
37-Pin High-Voltage Accessory Safety Kit Installation Guide
(supplied with the 37-Pin High-Voltage Accessory Safety Kit)
❑
Tools
–
1/8 in. flathead screwdriver
–
Wire insulation stripper
Connecting the Signals
To connect signals to the CB-37F-HVD terminal block, refer to Figure 2
while completing the following steps.
Note
Refer to the
Read Me First: Safety and Radio-Frequency Interference
document
before removing equipment covers or connecting or disconnecting any signal wires.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
