1. Connect the NI 9935 to the 15-pin connector on the module
as shown in the figure above.
2. Tighten the two jackscrews on the NI 9935 to hold it securely
in place.
Do not overtighten the jackscrews. Refer to the NI 9935 parts
diagram for the location of the jackscrews.
Specifications
The following specifications are typical unless otherwise noted.
Maximum voltage
30 V RMS/42 V
pk
/60 V DC
Operating temperature
-40 °C to 70 °C
Maximum current rating
≤1 A per channel
Screw terminal wiring
16 to 26 AWG copper conductor
wire with 4.5 mm (0.18 in.) of
insulation stripped from the end
Torque for screw terminal
0.4 N · m maximum
(3.4 lb · in. maximum)
Weight
44 g (1.6 oz)
NI 9935 Getting Started Guide and Specifications
|
© National Instruments
|
7
