special equipment, limited-energy parts of equipment, circuits
powered by regulated low-voltage sources, and electronics.
Caution
Do not connect to signals or use for
measurements within Measurement Categories II, III,
or IV.
Isolation Voltages
Port-to-earth ground
...................................................
Withstand
500 V
rms
verified by a 5s
dielectric withstand test
...................................................
Continuous
60 VDC, Measurement
Category I
Safety and Hazardous Locations Standards
This product is designed to meet the requirements of the
following electrical equipment safety standards for measurement,
control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
•
EN 60079-0:2012, EN 60079-15:2010
•
IEC 60079-0: Ed 6, IEC 60079-15; Ed 4
NI 9866 Getting Started Guide
|
© National Instruments
|
13