NI-9862 Getting Started
NI-9862 Getting Started
This document explains how to connect to the NI-9862.
The NI-9862 module requires the latest NI-XNET software to be installed. The latest
version of the NI-XNET software is at
.
Note
Before you begin, read the NI-9862 Safety, Environmental,
and Regulatory Information and complete the software and hardware
installation procedures in your chassis documentation.
Note
The guidelines in this document are specific to the NI-9862.
The other components in the system might not meet the same safety
ratings. Refer to the documentation for each component in the system to
determine the safety and EMC ratings for the entire system.
Safety Guidelines
Caution
Observe all instructions and cautions in the user documentation.
Using the product in a manner not specified can damage the product and
compromise the built-in safety protection.
Attention
Suivez toutes les instructions et respectez toutes les mises
en garde de la documentation d'utilisation. L'utilisation du produit de
toute autre façon que celle spécifiée risque de l'endommager et de
compromettre la protection de sécurité intégrée.
Safety Guidelines for Hazardous Locations
The NI-9862 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous
locations; Class I, Zone 2, AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations;
© National Instruments
3
NI-9862 Getting Started
