National Instruments NI 9223, Calibration Procedure

Page: 1 / 8

CALIBRATION PROCEDURE
NI 9222/9223
This document contains the verification and adjustment procedures for the National
Instruments 9222 and National Instruments 9223. For more information on calibration, visit
ni.com/calibration
. In this document, the NI 9222/9223 with screw terminal and
NI 9222/9223 with BNC are referred to inclusively as the NI 9222/9223.
Contents
Software.................................................................................................................................... 1
Documentation.......................................................................................................................... 2
Test Equipment......................................................................................................................... 2
Test Conditions......................................................................................................................... 3
Initial Setup............................................................................................................................... 3
Verification............................................................................................................................... 4
Accuracy Verification....................................................................................................... 4
Adjustment................................................................................................................................ 6
Accuracy Adjustment ....................................................................................................... 6
EEPROM Update ..................................................................................................................... 7
Reverification ........................................................................................................................... 7
Accuracy Under Calibration Conditions .................................................................................. 7
Worldwide Support and Services ............................................................................................. 8
Software
Calibrating the NI 9222/9223 with screw terminal requires the installation of NI-DAQmx 9.2 or
later on the calibration system. Calibrating the NI 9222/9223 with BNC requires the installation
of NI-DAQmx 9.9 or later. You can download NI-DAQmx from
ni.com/downloads
.
NI-DAQmx supports LabVIEW, LabWindows
™
/CVI
™
, C/C++, C#, and Visual Basic .NET.
When you install NI-DAQmx, you only need to install support for the application software that
you intend to use.
ni.com/manuals
Deutsch Français