©
National Instruments Corporation
11
NI 6601/6602 Calibration Procedure
4.
Arm counter 0 to perform simple event counting.
5.
Configure counter 1 to perform single-pulse generation.
Traditional NI-DAQ Function Call
LabVIEW Block Diagram
Call
GPCTR_Control
with the following
parameters:
deviceNumber
: The value set by MAX
gpctrNum
:
ND_COUNTER_0
action
:
ND_PROGRAM
“TASK ID” out connects to “TASK ID” in of step 11.
Traditional NI-DAQ Function Call
LabVIEW Block Diagram
Call
GPCTR_Set_Application
with the
following parameters:
deviceNumber
: The value set by MAX
gpctrNum
:
ND_COUNTER_1
application
:
ND_SINGLE_PULSE_GNR