Index
© National Instruments Corp.
Index- 9
NI-488.2M UM for Windows NT
GPIB addresses
address bit configuration (table), 1-2
configuring in ibconf
Base I/O Address option, 7-4
GPIB Primary Address option, 7-6, 7-9
GPIB Secondary Address option, 7-6, 7-9
Repeat Addressing option, 7-10
listen address, 1-2
primary, 1-2
purpose, 1-2
repeat addressing, 4-5 to 4-6
secondary, 1-2
syntax in ibic, 5-5
talk address, 1-2
gpib-nt.com file, 1-7
GPIB programming techniques
device-level calls and bus management, 6-3 to 6-4
high-speed data transfers, 6-2 to 6-3
enabling HS488, 6-2 to 6-3
system configuration effects, 6-3
parallel polling, 6-10 to 6-12
implementing, 6-10 to 6-12
using NI-488 functions, 6-10 to 6-11
using NI-488.2 routines, 6-11 to 6-12
serial polling, 6-5 to 6-9
automatic serial polling, 6-6 to 6-7
autopolling and interrupts, 6-7
stuck SRQ state, 6-6
service requests
from IEEE 488 devices, 6-5
from IEEE 488.2 devices, 6-5 to 6-6
SRQ and serial polling
with NI-488 device functions, 6-7
with NI-488.2 routines, 6-8 to 6-9
Talker/Listener applications, 6-4 to 6-5
event queue, 6-4 to 6-5
requesting service, 6-5
waiting for messages from Controller, 6-4
termination of data transfers, 6-1 to 6-2
waiting for GPIB conditions, 6-3
gpib-vdd.dll file, 1-7
gpibclsd.sys file, 1-6
gpib.dll file, 1-7. See also NI-488.2M DLL .
GPIBInfo utility, 1-7, 4-3
gpibxxxx.sys file, 1-6
