![background image](http://html.mh-extra.com/html/national-instruments/mydaq-195509d-01l/mydaq-195509d-01l_user-manual-and-specifications_709607034.webp)
NI myDAQ User Guide and Specifications
34
ni.com
13. In the
Supported Physical Channels
window, select
audioOutputLeft
from under the Dev
x
(NI myDAQ) option. You can
also press <Ctrl> while clicking
audioOutputRight
to select both
channels.
14. Click
Finish
to exit the Create New Express Task dialog.
15. On the
Configuration
tab of the DAQ Assistant front panel window,
configure voltage channel 0 by selecting
VoltageOut_0
in the
Channel Settings
pane, and setting
Max
to
2
and
Min
to
-2
in the
Signal Output Range
pane. Repeat this step for voltage channel 1 if
you configured the task for two channels.
16. Under
Timing Settings
, set
Generation Mode
to
Continuous
Samples
.
17. Click
OK
to exit the DAQ Assistant configuration front panel. The VI
builds. Click
No
on the Confirm Auto Loop Creation dialog box that
displays.
18. Wire the
data
output terminal of the first DAQ Assistant Express VI to
the
data
input terminal of the second DAQ Assistant Express VI.