5
NI-DMM Instrument Driver Quick Reference
Triggers
ICON
TYPE
PARAMETER
VALUE TO SET, COMMENTS
ViSession vi
Session
handle
ViInt32
Trigger Source
Default = Immediate
ViReal64 Trigger
Delay
Default
=
Auto
ViSession
vi
Session handle
ViSession
vi
Session handle
ViInt32 Trigger
Slope
ViSession vi
Session
handle
ViInt32
Slope
ViSession vi
Session
handle
ViInt32 Measurement
Default
=
None
Complete
Destination
ViSession
vi
Session handle
ViInt32
Slope
niDMM Configure Meas Complete Slope
(niDMM_ConfigureMeasCompleteSlope)
Sets the MC signal to either rising edge or falling edge polarity.
niDMM Configure Meas Complete Dest
(niDMM_ConfigureMeasCompleteDest)
Specifies the destination of the Measurement Complete (MC) signal.
niDMM Configure Sample Trigger Slope
(niDMM_ConfigureSampleTriggerSlope)
Sets the Sample Trigger Slope property to either rising edge or falling edge polarity.
niDMM Configure Trigger Slope
(niDMM_ConfigureTriggerSlope)
Sets the Trigger Slope property to either rising edge or falling edge polarity.
niDMM Send Software Trigger
(niDMM_SendSoftwareTrigger)
Sends a command to trigger the DMM.
niDMM Configure Trigger
(niDMM_ConfigureTrigger)
Configures the DMM trigger source and trigger delay.
©
National Instruments Corporation
322614f.qxp 11/23/2004 10:13 AM Page 5
