National Instruments IMAQ PCI-1426, User Manual

Page: 41 / 41

Index
© National Instruments Corporation I-3 IMAQ PCI-1426 User Manual
N
National Instruments application software, 1-4
National Instruments support and
services, B-1
NI support and services, B-1
NI Vision Assistant, 1-4
NI-IMAQ driver software, 1-3
O
optional equipment, 2-2
P
programming examples (NI resources), B-1
R
Real-Time System Integration (RTSI) bus, 1-2
region of interest (ROI) circuitry, 3-6
region of interest, in acquisition window
control, 3-7
requirements for getting started, 2-1
RS422_IN± signal (table), 4-3
S
scatter-gather DMA controllers, 3-7
SDRAM, 3-4
serial interface, 3-8
SerTC± signal (table), 4-3
SerTFG± signal (table), 4-4
signal connections, 4-1
connectors
15-pin D-SUB connector, 4-2
IMAQ 1426 connectors (figure), 4-1
MDR 26-pin connector, 4-2
signal descriptions, 4-3
software (NI resources), B-1
software controlled start conditions, 3-7
software programming choices, 1-3
integration with DAQ, 1-5
National Instruments IMAQ Vision, 1-4
NI Vision Builder for Automated
Inspection, 1-4
NI Vision Development Module, 1-4
NI-IMAQ driver software, 1-3
Vision and Motion, 1-5
start conditions
delayed acquisition, 3-8
software control, 3-7
trigger control, 3-7
support, technical, B-1
T
technical support, B-1
timing circuitry, high-speed, 3-6
training and certification (NI resources), B-1
trigger
configuration options (table), 3-5
control and mapping circuitry, 3-4
controlled start conditions, 3-7
troubleshooting (NI resources), B-1
TTL_TRIG signal (table), 4-3
U
unpacking the IMAQ 1426, 2-2
W
Web resources, B-1
X
X<3..0>± signal (table), 4-3
XCLK± signal (table), 4-3