© National Instruments Corporation
vii
PCI-GPIB for Solaris 2
About
This
Manual
This manual contains instructions to help you install and configure the
National Instruments PCI-GPIB interface board and the NI-488.2M
software for Solaris 2.
This manual assumes that you are already familiar with Solaris 2.
How to Use the Manual Set
Use this getting started manual to install and configure your PCI-GPIB
and the NI-488.2M software for Solaris 2.
Use the NI-488.2M Software Reference Manual to learn the basics of
GPIB and how to develop an application program. The manual also
contains specific NI-488 function and NI-488.2 routine information, such
as format, parameters, and possible errors.
Organization of This Manual
This manual is organized as follows:
•
Chapter 1, Introduction, explains how to use this manual, lists what
you need to get started, and briefly describes the PCI-GPIB and the
NI-488.2M software.
•
Chapter 2, Hardware Installation, contains instructions for installing
your PCI-GPIB.
•
Chapter 3, Software Installation, contains instructions to help you
install and configure your NI-488.2M software.
•
Chapter 4, Verify the Installation, describes how to verify the
software installation and how to troubleshoot problems.
•
Chapter 5, Begin to Use the NI-488.2M Software, helps you get
started with the NI-488.2M software for Solaris 2.
