![background image](http://html.mh-extra.com/html/national-instruments/fieldpoint-fp-tb-1/fieldpoint-fp-tb-1_operating-instructions-manual_710229004.webp)
©
National Instruments Corp.
3
FP-TB-1/2/3 Operating Instructions
4. Slide the terminal base along the DIN rail until its local bus
connector mates with the connector of the terminal base or
network module adjacent to it.
5. After the terminal base is in position, lock it to the DIN rail by
pushing the rail clip to the locked position.
6. To add more terminal bases, install them on the rail and
connect their local bus connectors together.
7. Place the protective cover onto the local bus connector of the
last terminal base on the bank, as shown in Figure 3. Add rail
locks by sliding them on and tightening the screws.
Figure 3.
Adding Rail Locks and Protective Cover
Mounting the FP-TB-1/2/3 to a Panel
Caution
To avoid damaging the network module and
terminal base, make sure that power is not applied to the
network module while you are installing or removing a
terminal base.
Follow these steps to mount the terminal base on a wall or panel.
1. Use Figure 4 to locate where to drill the mounting holes on the
panel. Dimensions are given in millimeters [inches].
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com