![background image](http://html.mh-extra.com/html/national-instruments/fieldpoint-fp-tb-1/fieldpoint-fp-tb-1_operating-instructions-manual_710229003.webp)
FP-TB-1/2/3 Operating Instructions
2
ni.com
Mounting the FP-TB-1/2/3 on a DIN Rail
Caution
To avoid damaging the network module and
terminal base, make sure that power is not applied to the
network module while you are installing or removing a
terminal base.
FieldPoint terminal bases have simple rail clips for reliable
mounting on a standard 35 mm DIN rail. Follow these steps to
mount the terminal base on a DIN rail.
1. Write down the serial number, located on the back of the
terminal base, before you mount it on the DIN rail.
2. Use a flathead screwdriver to open the DIN rail clip to the
unlocked position, as shown in Figure 1.
Figure 1.
Unlocking the Rail Clip
3. Attach the lip on the rear of the terminal base onto the top of a
35 mm DIN rail and press it down onto the DIN rail, as shown
in Figure 2.
Figure 2.
Attaching the Terminal Base to a DIN Rail
1
Rail clip locked
2
Rail clip unlocked
1
2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com