![background image](http://html1.mh-extra.com/html/national-instruments/fieldpoint-fp-3000/fieldpoint-fp-3000_user-manual_3429876065.webp)
Chapter 4
Block Reference
©
National Instruments Corporation
4-13
FieldPoint FP-3000 User Manual
FP-3000 Specific Parameters
CFG_OPTS
An option in the I/O function blocks to automatically set the scaling or alter
the block behavior. Generally, this option can make configuration easier.
DEV_OPTS
A list of device-wide options that can be turned on and off at will. The
current firmware supports only one option.
EXECUTION_STATISTICS
A repository containing performance statistics for a given block. Use
EXECUTION_STATISTICS
to asses the performance of a given
configuration and allow appropriate changes to be made.
Table 4-7.
Configuration Options
Option
Description
Automatically Adjust
XD_SCALE
Enabling this option allows the block to
automatically determine its
XD_SCALE
parameter, based on the physical I/O channel
range, which is set by parameters such as
FP_AI_100
range.
Ignore Unconnected
Interlock Inputs
By default, all interlock inputs on the CDO
block must be good, or the block enters fault
state. Enabling this option allows inputs with
a status of
Bad::Not_Connected
to be
ignored.
Table 4-8.
Device Options
Options
Description
Disable
CFG_OPTS
in all
I/O blocks
This bit disables all block configuration
options in
CFG_OPTS
. It is not
recommended that this bit be set since the
additional behavior can make configuration
easier.