D. Set the range and output values of the selected channel(s).
E. Set the attributes for the selected channel(s) by selecting the attribute and
entering the desired value.
F. Send commands to the selected channel(s) by choosing a command and
value and clicking on
Send
.
G. Repeat this procedure for each channel or group of channels you want
to configure.
H. Click on the
OK
button when you are finished, or click on the
Apply
button to save the changes and continue to configure channels. When
you click on
OK
or
Apply
, the changes are immediately sent to the device.
I. Select
File»Save
when you are done.
12
Where to Go from Here
After you get your hardware up and running, you might want to implement
features such as power-up defaults, network watchdog settings, or security.
Refer to your
FP-2000/2010 User Manual or online help for information
about features, configuration, application development, and troubleshooting.
16
322759b.qxd 7/26/01 9:52 AM Page 16