©
National Instruments Corp.
3
FBUS-HSE/H1 LD Installation Guide
b. Slide the FBUS-HSE/H1 LD to the desired position along
the DIN rail.
c. Lock the rail clip.
Installing onto a panel mount accessory, which you can order
separately from National Instruments:
a. Snap the panel mount accessory onto the module as shown
in Figure 3.
Figure 3.
Mounting the FBUS-HSE/H1 LD onto a Panel Mount Accessory
b. Lock the rail clip.
c. Mount the FBUS-HSE/H1 LD and panel mount accessory
onto the desired surface. You can drill pilot holes using the
directions in the
FieldPoint Network Module Panel Mount
Accessory Installation Guide
.
Ethernet Network Connection
Connect the FBUS-HSE/H1 LD to a High Speed Ethernet network
using a standard Category 5 Ethernet cable to the RJ-45 connector
on the FBUS-HSE/H1 LD. The connection of Ethernet network is
shown in Figure 4.