cRIO-9012/9014 Operating Instructions and Specifications
4
ni.com
Complete the following steps to install the controller on the chassis.
1.
Make sure that no power is connected to the controller or the chassis.
2.
Align the controller with the chassis as shown in Figure 3.
Figure 3.
Installing the Controller on the Chassis (Eight-Slot Chassis Shown)
3.
Slide the controller onto the controller slot on the chassis. Press firmly
to ensure the chassis connector and the controller connector are mated.
4.
Using a number 2 Phillips screwdriver, tighten the two captive screws
on the front of the controller to 1.3 N · m (11.5 lb · in.) of torque.
1
Controller
2
Captive Screws
3
Controller Slot
4
Reconfigurable Embedded Chassis
1
4
2
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
