manualshive.com logo in svg

National Instruments 6612, User Manual

Share
Download
National Instruments 6612 User Manual Download Page 21

2-8

|

ni.com

Chapter 2

Digital I/O

Using a Digital Source

To use DI Start Trigger with a digital source, specify a source and an edge. You can route many 
signals to DI Start Trigger. To view the complete list of possible routes, see the 

Device Routes

 

tab in MAX. Refer to 

Device Routing in MAX

 in the 

NI-DAQmx Help

 or the 

LabVIEW Help

 for 

more information. 

You also can specify whether the measurement acquisition begins on the rising- or falling-edge 
of DI Start Trigger.

Routing DI Start Trigger to an Output Terminal 

You can route DI Start Trigger out to any PFI <0..39>, RTSI <0..7>, PXI_Trig <0..7>, or 
PXIe-DSTARC terminal. The output is an active high pulse. All PFI terminals are configured as 
inputs by default.

The device also uses DI Start Trigger to initiate pretriggered DAQ operations. In most 
pretriggered applications, a software trigger generates DI Start Trigger. Refer to the

DI Reference Trigger Signal

 section for a complete description of the use of DI Start Trigger and 

DI Reference Trigger in a pretriggered acquisition operation.

DI Reference Trigger Signal

Use the DI Reference Trigger (di/ReferenceTrigger) signal to stop a measurement acquisition. 
To use a reference trigger, specify a buffer of finite size and a number of pretrigger samples 
(samples that occur before the reference trigger). The number of posttrigger samples (samples 
that occur after the reference trigger) desired is the buffer size minus the number of pretrigger 
samples.

After the acquisition begins, the device writes samples to the buffer. After the device captures 
the specified number of pretrigger samples, it begins to look for the reference trigger condition. 
If the reference trigger condition occurs before the device captures the specified number of 
pretrigger samples, it ignores the condition.

If the buffer becomes full, the device continuously discards the oldest samples in the buffer to 
make space for the next sample. This data can be accessed (with some limitations) before the 
device discards it. Refer to the KnowledgeBase document, 

Can a Pretriggered Acquisition be 

Continuous?

, for more information. To access this KnowledgeBase, go to 

ni.com/info

 and 

enter the Info Code 

rdcanq

.

Summary of Contents for 6612


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands