National Instruments 6589 User Manual Download

Page: 1 / 22

background image

GETTING STARTED GUIDE

NI 6589

1 Gbps, 20 Channel, LVDS Digital I/O Adapter Module

Note

Before you begin, complete the software and hardware installation

instructions in the getting started guide for your FlexRIO FPGA module or
Controller for FlexRIO.

The NI 6589 is a FlexRIO adapter module designed to work in conjunction with FlexRIO
FPGA modules and Controllers for FlexRIO.

The NI 6589 features 20 LVDS channels (16 data and 4 PFI), and sample rates up to 1 Gbit/s
on LVDS channels

This document explains how to install and configure the NI 6589.

Contents

Electromagnetic Compatibility Guidelines...............................................................................1
FlexRIO Documentation........................................................................................................... 2
Verifying the System Requirements..........................................................................................4
Unpacking................................................................................................................................. 4
Preparing the Environment....................................................................................................... 4
Installing the NI 6589............................................................................................................... 5
Confirming that Measurement & Automation Explorer (MAX) Recognizes the Device........ 5
Cables........................................................................................................................................5

Accessories........................................................................................................................6

Front Panel and Connector Pinouts...........................................................................................8
Block Diagrams.......................................................................................................................10
Component-Level Intellectual Property (CLIP)..................................................................... 12

NI 6589 CLIP..................................................................................................................13

Clocking.................................................................................................................................. 18
Where to Go Next................................................................................................................... 20
Worldwide Support and Services............................................................................................ 20

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits are designed to provide reasonable protection against harmful interference when the
product is operated in the intended operational electromagnetic environment.

This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,

1
2
3
...
»

Summary of Contents for 6589























Reviews:

No comments

Related manuals for 6589

Brand: ABB Pages: 2

FEPL-02 Ethernet POWERLINK

Brand: ABB Pages: 2

Brand: ABB Pages: 52

Brand: ABB Pages: 6

Relion 615 series

Brand: ABB Pages: 136

Relion 670 series

Brand: ABB Pages: 760

Brand: ABB Pages: 56

ACS850-04 series

Brand: ABB Pages: 296

Brand: ABB Pages: 320

Brand: ABB Pages: 17

Brand: ABB Pages: 104

Brand: ABB Pages: 370

Brand: ABB Pages: 2

FPBA-01 PROFIBUS DP

Brand: ABB Pages: 2

615 Series ANSI

Brand: ABB Pages: 60

Brand: S&C Pages: 40

Brand: Watts Pages: 2

Brand: Mako Networks Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands