manualshive.com logo in svg

National Instruments 6589, Getting Started Manual, Page: 4 / 22

Share
Download
National Instruments 6589 Getting Started Manual Download Page 4

Verifying the System Requirements

To use the FlexRIO Support instrument driver, your system must meet certain requirements.
For more information about minimum system requirements, recommended system, and
supported application development environments (ADEs), refer to the 

FlexRIO Support

Readme

, which is available on the FlexRIO Support software DVD or online at 

ni.com/

updates

.

Unpacking

Caution

 

To prevent ESD from damaging the devices, ground yourself using a

grounding strap or by holding a grounded object, such as your computer chassis.

1.

Touch the antistatic package to a metal part of the computer chassis.

2.

Remove each module from the package and inspect it for loose components or any other
sign of damage.

Caution

 

Never touch the exposed pins of connectors.

Note

 

Do not install a device if it appears damaged in any way.

3.

Unpack any other items and documentation from the kit.

Store the devices in the antistatic package when they are not in use.

Preparing the Environment

Ensure that the environment you are using the NI 6589 in meets the following specifications.

Operating temperature (IEC 60068-2-1,
IEC 60068-2-2)

0 °C to 55 °C

Operating humidity (IEC 60068-2-56)

10% to 90% RH, noncondensing

Pollution Degree

2

Maximum altitude

2,000 m at 25 °C ambient temperature

Indoor use only.

Note

 

Refer to the 

NI 6589 Specifications

 at 

ni.com/manuals

 for complete

specifications.

Caution

 

Clean the hardware with a soft, nonmetallic brush. Make sure that the

hardware is completely dry and free from contaminants before returning it to
service.

4

  | 

ni.com

  | 

NI 6589 Getting Started Guide

Summary of Contents for 6589























Reviews:

No comments